Flat Roof Installation in Peterborough: EPDM, Fibreglass, and Felt Explained
Replacing a flat roof? Here''s a clear comparison of the three main flat roofing systems — EPDM rubber, fibreglass (GRP), and felt — so you can make the right choice for your property.
Flat roofs cover millions of UK homes — on garages, extensions, bay windows, and full residential properties. When it's time to replace one, homeowners face a choice between three main systems: EPDM rubber, fibreglass (GRP), and traditional felt.
Each has its strengths. Here's a clear, honest comparison to help you make the right decision.
The Three Main Flat Roofing Systems
1. EPDM Rubber Roofing
EPDM (Ethylene Propylene Diene Monomer) is a synthetic rubber membrane that has become one of the most popular flat roofing materials in the UK over the past two decades.
How it works: A single sheet of rubber membrane is bonded to the roof deck using adhesive. The membrane is highly flexible, accommodating the natural movement of the building without cracking or splitting.
Key advantages:
- Extremely durable — typical lifespan of 30–50 years
- Highly resistant to UV, ozone, and extreme temperatures
- Flexible — won't crack in cold weather or become brittle with age
- Lightweight — minimal additional load on the roof structure
- Low maintenance — requires little more than an annual inspection
- Environmentally friendly — EPDM is recyclable and has a low carbon footprint
Considerations:
- Requires skilled installation — poorly bonded seams are the primary cause of EPDM failures
- Not suitable for roofs with complex detailing or many penetrations (pipes, vents) without careful planning
Best for: Garages, extensions, and flat roof properties where longevity and low maintenance are priorities.
2. Fibreglass (GRP) Roofing
GRP (Glass Reinforced Plastic) roofing — commonly called fibreglass — is a cold-applied liquid system that cures to form a seamless, rigid waterproof surface.
How it works: Layers of fibreglass matting are saturated with resin and applied to the roof deck. A topcoat is applied over the cured laminate, providing UV protection and the finished surface.
Key advantages:
- Completely seamless — no joints means no joint failures
- Extremely hard and durable surface — resistant to foot traffic and impact
- Can be formed around complex shapes and detailing
- Available in a range of colours and finishes
- Lifespan of 25–40 years with proper installation
Considerations:
- More rigid than EPDM — can crack if the roof deck moves significantly (important on older properties with less stable structures)
- Requires dry conditions for installation — the resin won't cure properly in cold or damp weather
- Slightly higher cost than EPDM on larger areas
Best for: Extensions, porches, and areas where a hard-wearing, attractive finish is important. Particularly popular for bay window roofs and small extensions.
3. Traditional Felt Roofing
Felt roofing (built-up felt or torch-on felt) has been used on UK flat roofs for decades. While largely superseded by EPDM and GRP for new installations, it remains a cost-effective option for budget-conscious repairs and replacements.
How it works: Multiple layers of bitumen-impregnated felt are applied to the roof deck, either cold-bonded or torch-applied (melted with a gas torch to bond the layers together).
Key advantages:
- Lower upfront cost than EPDM or GRP
- Widely available and familiar to most roofers
- Torch-on felt is more durable than traditional cold-bonded felt
Considerations:
- Shorter lifespan — typically 10–20 years for torch-on felt, less for cold-bonded
- More susceptible to UV degradation, blistering, and cracking than modern systems
- Joints and laps are potential weak points
Best for: Budget replacements where longevity is less of a priority, or temporary solutions while a more permanent system is planned.
Which System Is Right for You?
| EPDM | Fibreglass (GRP) | Felt | |
|---|---|---|---|
| Lifespan | 30–50 years | 25–40 years | 10–20 years |
| Maintenance | Very low | Very low | Moderate |
| Appearance | Matt black/grey | Smooth, various colours | Matt grey/black |
| Foot traffic | Moderate | Excellent | Poor |
| Complex shapes | Good | Excellent | Good |
| Cost | Mid | Mid–High | Low |
For most homeowners replacing a garage or extension roof, EPDM offers the best combination of longevity, low maintenance, and value. For a more decorative finish or a roof that needs to handle foot traffic, fibreglass is the better choice. Felt is best reserved for budget-constrained situations.
The Flat Roof Installation Process
Regardless of the system chosen, the installation process follows similar steps:
- Remove the old roof covering — stripping back to the deck
- Inspect and repair the deck — replacing any rotten or damaged boards
- Install insulation (if upgrading) — flat roofs are an excellent opportunity to improve thermal performance
- Apply the new system — EPDM bonded, GRP laminated, or felt torched
- Fit outlets and flashings — ensuring all drainage points and wall junctions are properly sealed
- Final inspection — checking the entire surface and all details before completion
Flat Roof Specialists in Peterborough
Manor Roofing Services install EPDM, fibreglass, and felt flat roofs across Peterborough, Cambridgeshire, Lincolnshire, and Norfolk. We'll advise you honestly on the best system for your property and budget.
Explore Topics
Written by
Manor Roofing Services
Content creator and writer sharing insights and stories.